其實這款小型超聲波清洗機它現在有多種模式，可以根據不同的物品進行不同的清潔。總體而言，其容量能滿足基本要求，可輕松浸泡，無障礙清洗。小裝置可以全身浸沒，自然可視化操作，使污垢去除更快。當然，我們在運行的時候也需要知道，傳統的清洗設備大多是需要根據混合液的大小來清洗所有的物品，而小型超聲波清洗機則不然。清洗時，其對象可分為不同類別。由于對象的性質不同，分類清洗可以更有效。這里還要掌握的是針對不同物件量身定制的各種清洗模式，比如眼鏡、3D墨鏡、老花鏡等。選擇軟清洗模式;項鏈、手鏈、胸針、耳環、玉鐲、戒指及發飾。選擇一個強大的經濟模式;例如名貴手表、陶瓷表帶、鋼鏈表帶等。有了它，您仍然可以選擇維護和清潔模式。超聲波清洗機的多種清洗模式，使不同物品在清洗時更加安全。

In fact, this small ultrasonic cleaner now has multiple modes, which can be cleaned according to different items. In general, its capacity can meet the basic requirements, and it can be easily soaked and cleaned without obstacles. The small device can be immersed in the whole body, and the natural visual operation makes the dirt removal faster. Of course, we also need to know that most traditional cleaning equipment needs to clean all items according to the size of the mixture, while small ultrasonic cleaning machines do not. When cleaning, the objects can be divided into different categories. Due to different properties of objects, classified cleaning can be more effective. What we need to master here is various customized cleaning modes for different objects, such as glasses, 3D sunglasses, reading glasses, etc. Select soft cleaning mode; Necklaces, bracelets, brooches, earrings, jade bracelets, rings and hair ornaments. Choose a strong economic model; For example, expensive watches, ceramic watchbands, steel chain watchbands, etc. With it, you can still choose maintenance and cleaning modes. The multiple cleaning modes of the ultrasonic cleaner make different items safer when cleaning.

小型超聲波清洗機尤其是現在它的清洗效果很好，相信大家也看到了很多人認為銷售的小型超聲波清洗機只能清洗表面的灰塵，從表面變得清晰透明。例如，以眼鏡鏡片為例，小型超聲波清洗機可以清洗鏡片表面，尤其是其眼鏡布很難擦拭鏡片油脂和污垢，尤其是鏡框和鏡片之間的接縫處。

The small ultrasonic cleaning machine has a good cleaning effect, especially now. I believe you have seen that many people believe that the small ultrasonic cleaning machine sold can only clean the dust on the surface, becoming clear and transparent from the surface. For example, taking eyeglasses as an example, a small ultrasonic cleaning machine can clean the lens surface, especially its eyewear cloth, which is difficult to wipe the oil and dirt of the lens, especially the joint between the frame and the lens.

小型超聲波清洗機可以清洗細節，比如佩戴首飾時間長了會比較枯燥。放入小型超聲波清洗機，可剝離污垢，恢復其光澤。對于客戶您需要知道的是，一般來說，小型超聲波清洗機采用超聲波技術，在真空噴砂的作用下，可以輕松的清洗凹槽以及縫隙和死角處的污垢。我今天談論的杯子有正確的頻率，這是關心的關鍵。振動頻率能去除物體表面和間隙上的污垢而不損傷它，避免了振動頻率過低、清洗不干凈、振動頻率過高的缺點。配合清潔劑使用，尤其是油脂和污垢。

Small ultrasonic cleaner can clean details, such as wearing jewelry for a long time will be boring. Put it into a small ultrasonic cleaner to peel off dirt and restore its luster. What you need to know for customers is that, generally speaking, small ultrasonic cleaners use ultrasonic technology. Under the effect of vacuum sandblasting, they can easily clean the dirt in grooves, gaps and dead corners. The cup I'm talking about today has the right frequency, which is the key to concern. The vibration frequency can remove the dirt on the surface and gap of the object without damaging it, avoiding the shortcomings of low vibration frequency, unclean cleaning and high vibration frequency. Use with detergent, especially grease and dirt.

維護期間小型超聲波清洗機應保存在干燥、通風和清潔的工作環境中。遠離熱源，避免放置在潮濕環境中。定期清理清洗罐和儲液罐內的污垢，保持儀器內外清潔。因此，我們今天討論的設備的電氣控制箱和設備通風口應避免飛濺液體，遠離水蒸氣、灰塵、腐蝕性氣體等，并定期清潔灰塵。對于帶有過濾裝置的超聲波清洗機，應定期更換濾芯。帶傳動機構的小型超聲波清洗機應定期注入潤滑油，以確保傳動部件在良好的潤滑條件下工作。

During maintenance, the small ultrasonic cleaner shall be kept in a dry, ventilated and clean working environment. Keep away from heat sources and avoid being placed in a humid environment. Clean the dirt in the cleaning tank and liquid storage tank regularly to keep the inside and outside of the instrument clean. Therefore, the electrical control box and vent of the equipment we are discussing today should avoid splashing liquid, keep away from water vapor, dust, corrosive gas, etc., and clean the dust regularly. For ultrasonic cleaners with filtering devices, the filter element should be replaced regularly. The small ultrasonic cleaner with transmission mechanism shall be regularly injected with lubricating oil to ensure that the transmission parts work under good lubrication conditions.

在這種情況下，它會定期檢查老化的電氣部件，并定期測試設備的絕緣性能。特別是現在，它的儀器不能連續工作超過4小時。如果連續工作時間過長，將超聲波調節旋鈕旋轉到“0”位置，讓冷卻風扇繼續工作，以確保電源的內部散熱。這樣，小型超聲波清洗機稍作休息即可使用。長期運行后，儀器也應在關機前按此操作操作，以便儀器在關機前散發內部熱量。散熱通常需要3-5分鐘。定期運行油泵，每次至少運行10分鐘。如果您現在長時間不使用，請用蓋子蓋住超聲波清洗機，以防止濕氣和灰塵。

In this case, it will regularly check the aging electrical components and regularly test the insulation performance of the equipment. Especially now, its instruments cannot work continuously for more than 4 hours. If the continuous working time is too long, turn the ultrasonic adjusting knob to the "0" position, and let the cooling fan continue to work to ensure the internal heat dissipation of the power supply. In this way, the small ultrasonic cleaning machine can be used after a short rest. After long-term operation, the instrument should also be operated according to this operation before shutdown, so that the instrument can emit internal heat before shutdown. Heat dissipation usually takes 3-5 minutes. Run the oil pump regularly for at least 10 minutes each time. If you do not use it for a long time, please cover the ultrasonic cleaner with a cover to prevent moisture and dust.

濟南科爾超聲波設備有限公司專注生產多槽手動超聲波清洗機等相關的產品,更多精彩內容請點擊我們的網站:http://www.slhysz.net

Jinan Keer Ultrasonic Equipment Co., Ltd. focuses on the production of multi slot manual ultrasonic cleaners and other related products. For more highlights, please click our website: http://www.slhysz.net